cschenkeltherolf
Posts: 10
Joined: Wed Jul 14, 2010 2:16 am

Failed prerequisite install shows as successful.

Our product has the Office 2007 PIAs as a prerequisite install.

The problem is, however, that if the user were to check the box to install these even though Office 2007 is not installed (or, say, the installation failed for any sort of reason), the prerequisites dialog actually says the prerequisite was installed successfully, even though they weren't (the 2007 PIAs require Office 2007). This is compounded by the fact that we are installing the PIAs with the /quiet flag, so the dialog stating that Office 2007 is required won't be shown to the user. Is this a known (or even fixed) issue? Is there a workaround if not?

We're using version 7.1.3.
Bogdan
Posts: 2796
Joined: Tue Jul 07, 2009 7:34 am
Contact: Website

Re: Failed prerequisite install shows as successful.

Hi,

I've tested this scenario on my machines and indeed the installation fails but also the bootstrapper says the prerequisite failed to install. It doesn't says
that the installation completed successful.

However, the solution I would recommend is to install the prerequisite with basic user interface (use the command line switch "/qb") and this way if the installation fails the user can see that
and also see the reason, if an error message is given.

Regards,
Bogdan
Bogdan Mitrache - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
cschenkeltherolf
Posts: 10
Joined: Wed Jul 14, 2010 2:16 am

Re: Failed prerequisite install shows as successful.

Sorry, I didn't mean to imply it showed as installing successfully, but rather in the 'action' column in the prerequisites list, it shows 'Installed', which seems slightly misleading.

I appreciate the suggestion with the /qb flag, but unfortunately we don't want any dialogs popping up for prerequisite installs and this still shows the progress bar. I'm not aware of a way to only show only error dialogs if necessary without also showing the progress dialog.
GabrielBarbu
Posts: 2146
Joined: Thu Jul 09, 2009 11:24 am
Contact: Website

Re: Failed prerequisite install shows as successful.

Hello,

Would the /qn flag be of use?
Regarding the 'Installed' status, I'm afraid there's not much we can do about that. The 'Installed' status appears because the prerequisite's Install Conditions are met after the prerequisite's installation. Your particular case indeed makes it seem misleading.

Best regards,
Gabriel
Gabriel Barbu
Advanced Installer Team
http://www.advancedinstaller.com/
cschenkeltherolf
Posts: 10
Joined: Wed Jul 14, 2010 2:16 am

Re: Failed prerequisite install shows as successful.

Thanks for the responses, Gabriel. I will give the /qn flag a try.

Return to “Common Problems”