We’re moving our forums to a new platform.

You can still browse and search existing topics, but you can no longer create new topics or post replies.

For questions, technical issues, or feature requests, please don’t hesitate to contact our support team at support@advancedinstaller.com.

Thank you for your understanding!

shetty_rohan
Posts: 363
Joined: Fri Dec 07, 2012 5:28 am
Location: Bangalore, India
Contact: Website

Support for Microsoft system center(SCCM)

Hi,

I have written couple of installers, and I need the support for the Microsoft System Center(SCCM). Basically I want these to be installed remotely using the MSC.

For doing this, is it enough if I support the "slient (No UI)" for the prerequisites? Or do I need to do anything else? Are there any other limitations?

I would appreciate your help on the same

Note: I have the "enterprise" license.

Regards,
Rohan
Dan
Posts: 4530
Joined: Wed Apr 24, 2013 3:51 pm

Re: Support for Microsoft system center(SCCM)

Hello Rohan,

In order to achieve that you need to ensure that your prerequisites will be installed silent(with No UI), and also when you launch from the command line your main package this will be silently too. In order to have a silent installation for your prerequisite you can select it and in the “Setup Files” tab you can edit the “Install Command Lines” to the appropriate value for the related prerequisite.

If you have any custom dialogs for the main application that require user input please make sure you set correctly these properties from the command line or you have strong defaults for them.

Also, to ensure the installer has all the properties required set correctly you can define a custom “Launch condition” using those properties.

Best regards,
Dan
Dan Ghiorghita - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
shetty_rohan
Posts: 363
Joined: Fri Dec 07, 2012 5:28 am
Location: Bangalore, India
Contact: Website

Re: Support for Microsoft system center(SCCM)

Thank you Dan. I have taken care of all the points mentioned by you.

When I went through the "online help" for the SCCM(i.e http://www.advancedinstaller.com/user-g ... tions.html), it points to "SCCM Configurations". Is this mandatory to enable this??

I was not able to configure this because I do not have the "architect" license.

Regards,
Rohan
Dan
Posts: 4530
Joined: Wed Apr 24, 2013 3:51 pm

Re: Support for Microsoft system center(SCCM)

Hi Rohan,
When I went through the "online help" for the SCCM(i.e http://www.advancedinstaller.com/user-g ... tions.html), it points to "SCCM Configurations". Is this mandatory to enable this??
Please note that is not mandatory to do this. This is a feature which speeds up the ”SCCM” deployment, but it can be replaced with the support available in the SCCM Manager, the deployment engineers can create the configuration files by themselves.

If you have any questions, please let us know.

Best regards,
Dan
Dan Ghiorghita - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
shetty_rohan
Posts: 363
Joined: Fri Dec 07, 2012 5:28 am
Location: Bangalore, India
Contact: Website

Re: Support for Microsoft system center(SCCM)

Thank you Dan. I do appreciate your help :-).

One more related question
- what happens if there are some issues which would generally require UI popup(like if user runs the setup in an operating system which is not supported, or if restart is required, or if the setup wants to terminate some application etc)

Regards,
Rohan
Dan
Posts: 4530
Joined: Wed Apr 24, 2013 3:51 pm

Re: Support for Microsoft system center(SCCM)

Hello Rohan,

Please note that deploying through SCCM or Active Directory assumed that the package was tested properly in FULL UI and only after several tests the package can be deployed in a silent install. Also, if a an error occurs, in silent mode then it can only be found in the log installation. Only there can be found relevant information about the installation.

If you have other questions, please let us know.

Best regards,
Dan
Dan Ghiorghita - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
shetty_rohan
Posts: 363
Joined: Fri Dec 07, 2012 5:28 am
Location: Bangalore, India
Contact: Website

Re: Support for Microsoft system center(SCCM)

Thank you for the explanation.
Dan
Posts: 4530
Joined: Wed Apr 24, 2013 3:51 pm

Re: Support for Microsoft system center(SCCM)

Hi Rohan,

You're welcome. If there is anything we can help with, please let us know.

Best regards,
Dan
Dan Ghiorghita - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
shetty_rohan
Posts: 363
Joined: Fri Dec 07, 2012 5:28 am
Location: Bangalore, India
Contact: Website

Re: Support for Microsoft system center(SCCM)

Hi Dan,

Two more short question
- In case the setup fails then will it return some error code? If yes, is there any documentation??

- My setup also installs a prerequisite ".NET Framework 4.0 Client Profile" which uses the downloaded file from http://download.microsoft.com/download/ ... _setup.exe
Now when I run the setup, I could see that main setup completes before the dotNetFx40_Client_setup.exe(in the task manager I could see this)
Does the prerequisites gets installed in the asynchronous? or in synchronous manner?
If you need any more info like logs, please let me know.

Regards,
Rohan
Bogdan
Posts: 2796
Joined: Tue Jul 07, 2009 7:34 am
Contact: Website

Re: Support for Microsoft system center(SCCM)

Hi Rohan,

1) Please note that an MSI package is not a standalone executable, so it does not have a return code when the installation finishes or rollsback.
The installation is actually performed by msiexec.exe, which is a service from the OS. This service never exists, so you will not have an actual return code from the installation.

If the installation fails you need to try it again, but this time pass the installer a command line to create a verbose log, this will contain details about the failure reason.

2) No, but feature-based and post-install prerequisites are handled by a separate executable in case of silent installations, which runs after the entire installation has finished.
The way prerequisites install is quite complicated, it depends on the how you scheduled the prerequisite and the UI level of the main installer, i.e. full, basic or silent UI.

Regards,
Bogdan
Bogdan Mitrache - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
shetty_rohan
Posts: 363
Joined: Fri Dec 07, 2012 5:28 am
Location: Bangalore, India
Contact: Website

Re: Support for Microsoft system center(SCCM)

Sorry for the delayed response

Point (1): Thanks

Point (2)
- I am using the slient ui
- I am using feature based
- I am using the "Use files from disk".
Filename = dotNetFx40_Client_setup.exe
Slient(i.e /q)

Do let me know if you need any more details. In case this is not solvable then please ignore this

Regards,
Rohan
Bogdan
Posts: 2796
Joined: Tue Jul 07, 2009 7:34 am
Contact: Website

Re: Support for Microsoft system center(SCCM)

Hi Rohan,

Point (2) - in this case our installer launches asynchronously an EXE built by us, ad the end of the installation. Our EXE then launches each prerequisite,
one by one, synchronously. The EXE is the one which now launches and checks that all feature-based prerequisites have been installed.

However, this should not break your SCCM deployment. Have you encountered any problems because of it?

Regards,
Bogdan
Bogdan Mitrache - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
shetty_rohan
Posts: 363
Joined: Fri Dec 07, 2012 5:28 am
Location: Bangalore, India
Contact: Website

Re: Support for Microsoft system center(SCCM)

Thanks for the information. This behavior was noticed by me during the quiet installation testing.

We have not yet tested this with the SCCM. As of noew, you could consider that there is no problem.

Thanks,
Rohan

Return to “Building Installers”