brianh
Posts: 18
Joined: Mon Apr 11, 2011 9:14 am

win7 64bit build "invalid digital signature" on disk1.cab

Hi,

Advanced Installer Version 10.3
Building our 32bit application & install on a Windows 7 64bit development machine causes the following error when we try to install to any other machine:
"A file that is required cannot be installed because the cabinet file disk1.cab has an invalid digital signature. This may indicate that the cabinet file is corrupt."
When building from the same sources on a 32bit machine (XP or Server 2003) we do not get this error message.
Our complete install build is only 78MB so it is not the 600MB XP bug already mentioned elsewhere on the forums.

We are concerned as we are in the process of switching our build server to 64bit.

Anyone any idea why this might be happening?

Thanks,

Brian
Eusebiu
Posts: 4971
Joined: Wed Nov 14, 2012 2:04 pm

Re: win7 64bit build "invalid digital signature" on disk1.ca

Hi Brian,

I'm not sure why you encounter this behavior. I found many posts where the users complains about the same problem caused by the packages created with different installers and there are also different workarounds. However, it seems that the problem is usually caused by the Operating System or by Windows Installer.

Can you reproduce the behavior on multiple clean machines?

Best regards,
Eusebiu
Eusebiu Aria - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
brianh
Posts: 18
Joined: Mon Apr 11, 2011 9:14 am

Re: win7 64bit build "invalid digital signature" on disk1.ca

Eusebiu wrote:Hi Brian,
Can you reproduce the behavior on multiple clean machines?
The systems being installed to are clean machines (Virtual Machines) - repeated on XP 32 bit and Win7 32bit.
Those same VMs (clones) do not have the problem if the install is built on a 32bit machine.
Done a clean build from the development machine just to be sure too.

Thanks,

Brian
Eusebiu
Posts: 4971
Joined: Wed Nov 14, 2012 2:04 pm

Re: win7 64bit build "invalid digital signature" on disk1.ca

Hi,

Can you please send us the .AIP (project file) and a verbose log of the installation to support at advancedinstaller dot com so we can investigate them?

Best regards,
Eusebiu
Eusebiu Aria - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
brianh
Posts: 18
Joined: Mon Apr 11, 2011 9:14 am

Re: win7 64bit build "invalid digital signature" on disk1.ca

Eusebiu wrote:Hi,

Can you please send us the .AIP (project file) and a verbose log of the installation to support at advancedinstaller dot com so we can investigate them?

Best regards,
Eusebiu
Done.

Thanks,

Brian
rscott78
Posts: 7
Joined: Wed Aug 28, 2013 1:02 pm

Re: win7 64bit build "invalid digital signature" on disk1.ca

Sorry to resurrect and old thread... I'm having the exact same problem. Was there a resolution to this?
Eusebiu
Posts: 4971
Joined: Wed Nov 14, 2012 2:04 pm

Re: win7 64bit build "invalid digital signature" on disk1.ca

Hi,

We found that there was a problem with the certificate and it was necessary to recreate it. Also, if the certificate is converted to .PFX, please make sure that the conversion is done correctly.

Best regards,
Eusebiu
Eusebiu Aria - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
rscott78
Posts: 7
Joined: Wed Aug 28, 2013 1:02 pm

Re: win7 64bit build "invalid digital signature" on disk1.ca

Eusebiu wrote:Hi,

We found that there was a problem with the certificate and it was necessary to recreate it. Also, if the certificate is converted to .PFX, please make sure that the conversion is done correctly.

Best regards,
Eusebiu
I do have a certificate... the strange thing is that the installer works on other instances of Win7/64bit, just not this particular one.
Eusebiu
Posts: 4971
Joined: Wed Nov 14, 2012 2:04 pm

Re: win7 64bit build "invalid digital signature" on disk1.ca

Hi,

I'm not sure why the behavior is encountered only on that specific machine, there may be something corrupt on the machine (i.e. system file, configuration, etc.). We usually suggest users to test their scenarios on clean machines.

You can also compare the digital signature tool used on the machines that works with the tool used on the machine with the problem. Also you can take a look on the Digital Signature thread which might be helpful for you.

Best regards,
Eusebiu
Eusebiu Aria - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
fstutzman
Posts: 1
Joined: Tue Nov 12, 2013 3:03 pm

Re: win7 64bit build "invalid digital signature" on disk1.ca

I am adding my voice to this thread. I distribute consumer software and a small number of users are experiencing the same issue. My email to support could not offer a solution. If anyone has a resolution, would you please share? Thank you.
applejax33
Posts: 10
Joined: Wed Jul 24, 2013 7:24 pm

Re: win7 64bit build "invalid digital signature" on disk1.ca

*********** Sorry found in another area **************

Since this is a Signature Problem I though this would be the best place:

I have updated to 10.7 and now every build I try is:

The digital signing of the APPDIR\xxx.vshost.exe file failed. Error Message:SignTool Error: Invalid option: /fd
McKool
Posts: 113
Joined: Wed Jan 19, 2011 12:35 pm
Location: Darmstadt, Germany
Contact: Website

Re: win7 64bit build "invalid digital signature" on disk1.ca

Hello,

I'm just experimenting the same issue. I have updated today from version 10.6 to 10.7 and I get the error:

Code: Select all

Signing MSM... error.
The digital signing of the MSI package failed. Error Message:SignTool Error: Invalid option: /fd

Build finished because an error was encountered.
Bogdan
Posts: 2796
Joined: Tue Jul 07, 2009 7:34 am
Contact: Website

Re: win7 64bit build "invalid digital signature" on disk1.ca

Hi,

@McKool

Check out the following thread: http://www.advancedinstaller.com/forums ... =2&t=26855

@fstutzman

This is caused by a random bug in the OS, more details in the following thread: http://www.advancedinstaller.com/forums ... 945#p19375

Regards,
Bogdan
Bogdan Mitrache - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube

Return to “Common Problems”