kissack
Posts: 57
Joined: Fri Feb 04, 2011 11:45 am

Installation Path in Custom Setup

Hello,

I continue my investigation, but in case this is some familiar issue i would appreciate any hints that you may have.

Have a setup that has various features and have included the Custom Setup Dialog.

In Install Parameters have a fixed default path. (example: C:\MyFolder\MyApp)

Initial install:
1. Choose Custom Type and deselect some features and also change the location to a different folder than what comes in default (e.g. C:\MyFolder\MyAppTest).
2. Finish installation

Modify install:
1. Choose to Modify existing install
2.Select the remaining features.
3. The one that was previously installed shows location (just the path without the "Location" label)
4. Finish install

The problem is:
The added features are installed in the default path (C:\MyFolder\MyApp) and not the modified C:\MyFolder\MyAppTest.

I created a simple project, where I cannot replicate this behaviour, but finding the cause in my more complex project do not see what could be the cause.

Any previous experience from this issue?

Thank you.

Kissack
Eusebiu
Posts: 4971
Joined: Wed Nov 14, 2012 2:04 pm

Re: Installation Path in Custom Setup

Hi Kissack,

This problem may appear if the "Application Folder" from the Files and Folders page of your project contains no files (it contains only folders or no folder, too). This was an Advanced Installer limitation that was fixed in the newest version (11.1). Can you test your project using Advanced Installer 11.1 and see if the problem persists?

Best regards,
Eusebiu
Eusebiu Aria - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
kissack
Posts: 57
Joined: Fri Feb 04, 2011 11:45 am

Re: Installation Path in Custom Setup

Hello,
as part of my investigation I upgraded to 11.1 version before posting to this forum and the problem still persists.

Will check whether the application folder contains only directories (it's possible) and will let you know.

Thank you for the information.

Kissack
Bogdan
Posts: 2796
Joined: Tue Jul 07, 2009 7:34 am
Contact: Website

Re: Installation Path in Custom Setup

Right click on "Application Folder" in your project and go to Properties. There check to see if the option "Create folder on target machine" is ticked.

Maybe this is an older project and the upgrade to a newer version of AI failed to enable this option.

Regards,
Bogdan
Bogdan Mitrache - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
kissack
Posts: 57
Joined: Fri Feb 04, 2011 11:45 am

Re: Installation Path in Custom Setup

Yes exactly. That solved the issue. Thank you.

Return to “Common Problems”