Hello Gigi,
Given the DIFx reading material I used the Microsoft Driver Kit to fix-up and sign all four of the drivers in our product. That fixed the unattended installation issue. We had a further problem that when upgradding the previous devices were not fully unloaded before the new product was installed. Fixing this was a matter of using Microsoft's DevCon utility both within the install and the uninstall process.
I'll include a few documents below. The 1st is a writeup on creating a signable driver catalog. The 2nd is a writeup on creating a test signature and signing a driver. The 3rd is commands we added to our install and out uninstall to fix up the device PnP loading.
--Blaze
-------------------------------------------------------------------------------
How To Create Signable Driver Catalog
-------------------------------------------------------------------------------
Code: Select all
1. Driver Kit
Install:
'Windows Driver Kit 6001' (CD)
'Microsoft Winqual Submission Tool'
Note: You can find useful tools and documentation within the
'Microsoft Windows Driver Development Kit' (CD).
-------------------------------------------------------------------------------
2. Driver requirements
For a driver to be signable and support Plug and Play the driver must comply
with the details outlined in the following documents:
* Requirements for Driver Packages that are Used with the Driver Install
Framework (DIFx) Tools
* Using Authenticode to Digitally Sign Driver Packages
-------------------------------------------------------------------------------
3. Update the driver inf to have DriverPackageType and CatalogFile entries.
For a fictious Plus and Play toaster device the driver would contain:
[Version]
...
DriverPackageType = PlugAndPlay
CatalogFile = toaster.cat
...
-------------------------------------------------------------------------------
4. Find and repair problems within driver inf file.
Use the tool chkinf to analize each driver's inf file. The tool builds two
HTML report files within an 'htm' directory of the driver being analized.
Open the HTML reports, fix the reported errors and evaluate the warnings.
For a fictious Plus and Play toaster device the command would be:
c:\winddk\6001\tools\chkinf\chkinf.bat toaster.inf
-------------------------------------------------------------------------------
5. Generate a signable catalog file for driver
Copy all the driver files into an empty directory. Do not have any extra
files within the directory as they will be listed within the generated
catalog file.
Note: You could run the signability.exe tool, but it failed after my
initial success. Identical failures discussed on the internet
suggest using the inf2cat tool instead.
For a fictious Plus and Play toaster device the command would be:
"C:\Program Files\Microsoft Winqual Submission Tool 2\Inf2Cat"
/driver:. /os:XP_X86 /v
Note: The driver for TechniSat ATSC Tuner may be configured to support
Windows XP 32-bit and 64-bit.
Note: The generated catalog file is not human readable.
-------------------------------------------------------------------------------
How To Create Signature And Sign Driver
-------------------------------------------------------------------------------
Code: Select all
1. Driver Kit
Install:
'Windows Driver Kit 6001' (CD)
-------------------------------------------------------------------------------
2. Create a test Software Publisher Certificate (SPC)
First, delete any old certificate from the Personal certificate store for the
fictious company "toad":
C:\WINDDK\6001\bin\SelfSign\certmgr -del -c -n "www.toad.com" -s My
Now, create the new certificate for the fictious company "toad" and store it
in the certificate store:
C:\WINDDK\6001\bin\SelfSign\makecert -r -pe -ss My -n "CN=www.toad.com"
-b 01/01/2001 -e 12/31/9999
Note: This command generates X.509 certificate for testing purposes only.
This sample command generates a self-signed certificate; the
generated private key is exportable (included within certificate);
the certificate store name is 'My' (aka Personal); the subject's
simple certificate name conforming to X.500 is "CN=www.toad.com";
the start of the validity period is 01/01/2001 and the end of the
validity period is 12/31/9999.
Displays the content of the Personal certificate store.
C:\WINDDK\6001\bin\SelfSign\certmgr -s My
Now, launch the certificate manager GUI. The new certificate will be listed
as a Personal certificate.
C:\WINDDK\6001\bin\SelfSign\certmgr
1. Export the "www.toad.com" certificate with these settings:
* Do not export the private key
* DER encoded binary X.509
* Filename: TOAD_Certificate.cer
2. Export the "www.toad.com" private key with these settings:
* Export the private key
* Enable strong protection
* No password protection
* Filename: TOAD_Certificate.pfx
Delete the new certificate from the Personal certificate store.
C:\WINDDK\6001\bin\SelfSign\certmgr -del -c -s My -n "www.toad.com"
-------------------------------------------------------------------------------
3. Sign the driver catalog file with a Software Publisher Certificate (SPC)
For a fictious company "toad" with a fictious Plug and Play toaster device
the signing command would be:
C:\WINDDK\6001\bin\SelfSign\signtool sign -v -f TOAD_Certificate.pfx toaster.cat
Note: This command signs the catalog file of a Plug and Play driver with a
Software Publisher Certificate (SPC). This sample command signs the
catalog file using the SPC found within the certificate store 'My'.
Note: The signtool may sign using our certificate within the Personal
certificate store. To do this you would replace the signtool
arguments
-f TOAD_Certificate.pfx
with
-s My -n "www.toad.com"
(This assumes that our certificate is in the Personal certificate
store.)
Note: To load our certificate into the Personal certificate store, launch
the certificate manager GUI and import the certificate:
C:\WINDDK\6001\bin\SelfSign\certmgr
Import the "www.toad.com" certificate with these settings:
* Filename: TOAD_Certificate.pfx
* Place the certificate into the Personal certificate store
-------------------------------------------------------------------------------
4. Install the certificate on the target system
These two commands add the certificate in the file TestCertTOAD.cer to the
Trusted Root Certification Authorities certificate store and the Trusted
Publishers certificate store.
C:\WINDDK\6001\bin\SelfSign\certmgr -add TOAD_Certificate.cer -s -r localMachine root
C:\WINDDK\6001\bin\SelfSign\certmgr -add TOAD_Certificate.cer -s -r localMachine trustedpublisher
-------------------------------------------------------------------------------
Install script device PnP juggling to ensure clean installs
-------------------------------------------------------------------------------
Code: Select all
@ECHO * Step 1: Disable and remove devices.
%1"\Installer\DevCon\devcon" disable PCI\VEN_13D0
%1"\Installer\DevCon\devcon" remove PCI\VEN_13D0
%1"\Installer\DevCon\devcon" disable PCI\VEN_1666
%1"\Installer\DevCon\devcon" remove PCI\VEN_1666
%1"\Installer\DevCon\devcon" disable FTDIBUS\COMPORT*
%1"\Installer\DevCon\devcon" remove FTDIBUS\COMPORT*
%1"\Installer\DevCon\devcon" disable USB\VID_0403*
%1"\Installer\DevCon\devcon" remove USB\VID_0403*
@ECHO * Step 2: PnP hardware scan...
%1"\Installer\DevCon\devcon" rescan
@ECHO * Step 3: Wait while OS catches up with PnP device loading...
ping 127.0.0.1 -n 20 -w 1000 > nul
@ECHO * Step 4: Enable devices.
%1"\Installer\DevCon\devcon" enable PCI\VEN_13D0
%1"\Installer\DevCon\devcon" enable PCI\VEN_1666
%1"\Installer\DevCon\devcon" enable USB\VID_0403*
%1"\Installer\DevCon\devcon" enable FTDIBUS\COMPORT*
@ECHO * Step 5: Update PnP device drivers...
START /WAIT RunDll32.exe Syssetup.dll,UpdatePnpDeviceDrivers
@ECHO * Step 6: Enable devices.
%1"\Installer\DevCon\devcon" enable PCI\VEN_13D0
%1"\Installer\DevCon\devcon" enable PCI\VEN_1666
%1"\Installer\DevCon\devcon" enable USB\VID_0403*
%1"\Installer\DevCon\devcon" enable FTDIBUS\COMPORT*
-------------------------------------------------------------------------------
Uninstall script device PnP juggling to ensure clean uninstalls
-------------------------------------------------------------------------------
Code: Select all
@ECHO * Step 1: Disable and remove devices.
%1"\Installer\DevCon\devcon" disable PCI\VEN_13D0
%1"\Installer\DevCon\devcon" remove PCI\VEN_13D0
%1"\Installer\DevCon\devcon" disable PCI\VEN_1666
%1"\Installer\DevCon\devcon" remove PCI\VEN_1666
%1"\Installer\DevCon\devcon" disable FTDIBUS\COMPORT*
%1"\Installer\DevCon\devcon" remove FTDIBUS\COMPORT*
%1"\Installer\DevCon\devcon" disable USB\VID_0403*
%1"\Installer\DevCon\devcon" remove USB\VID_0403*
@ECHO * Step 2: Update PnP device drivers...
START /WAIT RunDll32.exe Syssetup.dll,UpdatePnpDeviceDrivers
FOLLOW US
Get the latest news in Application Packaging